Hi all. Trying to find this fire extinguisher bracket/guard for a Toyota HiAce.

Can’t seem to find it via Google search but that’s prolly me being shit a computers.

The Chubb guy either didn’t know or couldn’t be arsed thinking about it yesterday as they only supply the bottle and mounting plate that attaches to the grey mount/guard.

Any help appreciated

Trevtaowillgetyounowhere said:

Hi all. Trying to find this fire extinguisher bracket/guard for a Toyota HiAce.

Can’t seem to find it via Google search but that’s prolly me being shit a computers.

The Chubb guy either didn’t know or couldn’t be arsed thinking about it yesterday as they only supply the bottle and mounting plate that attaches to the grey mount/guard.

Any help appreciated

It looks like you found one…

Trevtaowillgetyounowhere said:

Hi all. Trying to find this fire extinguisher bracket/guard for a Toyota HiAce.

Can’t seem to find it via Google search but that’s prolly me being shit a computers.

The Chubb guy either didn’t know or couldn’t be arsed thinking about it yesterday as they only supply the bottle and mounting plate that attaches to the grey mount/guard.

Any help appreciated

that bracket looks to be upside down.

Trevtaowillgetyounowhere said:

Hi all. Trying to find this fire extinguisher bracket/guard for a Toyota HiAce.

Can’t seem to find it via Google search but that’s prolly me being shit a computers.

The Chubb guy either didn’t know or couldn’t be arsed thinking about it yesterday as they only supply the bottle and mounting plate that attaches to the grey mount/guard.

Any help appreciated

the grey guard could be a non standard one and thus pretty hard to find. Maybe try you local fire brigade station for advice.

Bogsnorkler said:

Trevtaowillgetyounowhere said:

Hi all. Trying to find this fire extinguisher bracket/guard for a Toyota HiAce.

Can’t seem to find it via Google search but that’s prolly me being shit a computers.

The Chubb guy either didn’t know or couldn’t be arsed thinking about it yesterday as they only supply the bottle and mounting plate that attaches to the grey mount/guard.

Any help appreciated

that bracket looks to be upside down.

It’s not

Trevtaowillgetyounowhere said:

Bogsnorkler said:

Trevtaowillgetyounowhere said:

Hi all. Trying to find this fire extinguisher bracket/guard for a Toyota HiAce.

Can’t seem to find it via Google search but that’s prolly me being shit a computers.

The Chubb guy either didn’t know or couldn’t be arsed thinking about it yesterday as they only supply the bottle and mounting plate that attaches to the grey mount/guard.

Any help appreciated

that bracket looks to be upside down.

It’s not

OK, just don’t let it happen again.

1pc Fire Extinguisher Wall Hanger Fire Extinguisher Hanger Wall-mounted Hanging

Bogsnorkler said:

Trevtaowillgetyounowhere said:

Hi all. Trying to find this fire extinguisher bracket/guard for a Toyota HiAce.

Can’t seem to find it via Google search but that’s prolly me being shit a computers.

The Chubb guy either didn’t know or couldn’t be arsed thinking about it yesterday as they only supply the bottle and mounting plate that attaches to the grey mount/guard.

Any help appreciated

the grey guard could be a non standard one and thus pretty hard to find. Maybe try you local fire brigade station for advice.

Mmm might do that if I can’t find one.

A similar one

Vehicle Extinguisher Bracket To Suit 2.3kg Chubb / Kidde Extinguisher With Hose Clip

Tau.Neutrino said:

1pc Fire Extinguisher Wall Hanger Fire Extinguisher Hanger Wall-mounted Hanging

Yeah plenty of them to be found and that’s what Chubb will supply. I’m really after the grey number that somewhat stops angry kids from kicking the shit of of the bottle

I have no idea why when I get take pictures on my phone to post here they always end up sideways.

Anyway the bottle sits behind the guard so kids don’t boot it when getting on for school.

Trevtaowillgetyounowhere said:

Tau.Neutrino said:

1pc Fire Extinguisher Wall Hanger Fire Extinguisher Hanger Wall-mounted Hanging

Yeah plenty of them to be found and that’s what Chubb will supply. I’m really after the grey number that somewhat stops angry kids from kicking the shit of of the bottle

You might need to make it

5mm bar , 100mm wide (?) Might be ok A local metal workshop should have a bending thingy. Anything north of NSW is on island time so take this into account.

Maybe try a car club of your model. They might have an idea how it needs to be done

Trevtaowillgetyounowhere said:

I have no idea why when I get take pictures on my phone to post here they always end up sideways.

Anyway the bottle sits behind the guard so kids don’t boot it when getting on for school.

Do you think that maybe it acts as a guard but isn’t a guard? Looks like it is a hand rail for getting on/off?

Trevtaowillgetyounowhere said:

Hi all. Trying to find this fire extinguisher bracket/guard for a Toyota HiAce.

Can’t seem to find it via Google search but that’s prolly me being shit a computers.

The Chubb guy either didn’t know or couldn’t be arsed thinking about it yesterday as they only supply the bottle and mounting plate that attaches to the grey mount/guard.

Any help appreciated

Any metalworking shop could make that fairly quickly. It’s not a complex part.

Spiny Norman said:

Trevtaowillgetyounowhere said:

Hi all. Trying to find this fire extinguisher bracket/guard for a Toyota HiAce.

Can’t seem to find it via Google search but that’s prolly me being shit a computers.

The Chubb guy either didn’t know or couldn’t be arsed thinking about it yesterday as they only supply the bottle and mounting plate that attaches to the grey mount/guard.

Any help appreciated

Any metalworking shop could make that fairly quickly. It’s not a complex part.

Ballpark figure ?

What is it called?

A U bollard is similar

wookiemeister said:

Spiny Norman said:

Trevtaowillgetyounowhere said:

Hi all. Trying to find this fire extinguisher bracket/guard for a Toyota HiAce.

Can’t seem to find it via Google search but that’s prolly me being shit a computers.

The Chubb guy either didn’t know or couldn’t be arsed thinking about it yesterday as they only supply the bottle and mounting plate that attaches to the grey mount/guard.

Any help appreciated

Any metalworking shop could make that fairly quickly. It’s not a complex part.

Ballpark figure ?

treefiddy

furious said:

Trevtaowillgetyounowhere said:

I have no idea why when I get take pictures on my phone to post here they always end up sideways.

Anyway the bottle sits behind the guard so kids don’t boot it when getting on for school.

Do you think that maybe it acts as a guard but isn’t a guard? Looks like it is a hand rail for getting on/off?

This seems likely. Anyway, if it’s on the school bus, ask whoever does bus acquisition.

wookiemeister said:

Spiny Norman said:

Trevtaowillgetyounowhere said:

Hi all. Trying to find this fire extinguisher bracket/guard for a Toyota HiAce.

Can’t seem to find it via Google search but that’s prolly me being shit a computers.

The Chubb guy either didn’t know or couldn’t be arsed thinking about it yesterday as they only supply the bottle and mounting plate that attaches to the grey mount/guard.

Any help appreciated

Any metalworking shop could make that fairly quickly. It’s not a complex part.

Ballpark figure ?

$150 – $200. A very rough guess – If I was doing it it’d be a bit cheaper though. The expensive part is the bent tube.

Spiny Norman said:

Trevtaowillgetyounowhere said:

Hi all. Trying to find this fire extinguisher bracket/guard for a Toyota HiAce.

Can’t seem to find it via Google search but that’s prolly me being shit a computers.

The Chubb guy either didn’t know or couldn’t be arsed thinking about it yesterday as they only supply the bottle and mounting plate that attaches to the grey mount/guard.

Any help appreciated

Any metalworking shop could make that fairly quickly. It’s not a complex part.

I thought this solution too. Or a old persons aid centre, they sell all sorts of stuff for old people.

Bogsnorkler said:

Spiny Norman said:

Trevtaowillgetyounowhere said:

Hi all. Trying to find this fire extinguisher bracket/guard for a Toyota HiAce.

Can’t seem to find it via Google search but that’s prolly me being shit a computers.

The Chubb guy either didn’t know or couldn’t be arsed thinking about it yesterday as they only supply the bottle and mounting plate that attaches to the grey mount/guard.

Any help appreciated

Any metalworking shop could make that fairly quickly. It’s not a complex part.

I thought this solution too. Or a old persons aid centre, they sell all sorts of stuff for old people.

what about Thommo? he does railing.

furious said:

Trevtaowillgetyounowhere said:

I have no idea why when I get take pictures on my phone to post here they always end up sideways.

Anyway the bottle sits behind the guard so kids don’t boot it when getting on for school.

Do you think that maybe it acts as a guard but isn’t a guard? Looks like it is a hand rail for getting on/off?

You might be right.

Other side of door.

buffy said:

furious said:

Trevtaowillgetyounowhere said:

I have no idea why when I get take pictures on my phone to post here they always end up sideways.

Anyway the bottle sits behind the guard so kids don’t boot it when getting on for school.

Do you think that maybe it acts as a guard but isn’t a guard? Looks like it is a hand rail for getting on/off?

This seems likely. Anyway, if it’s on the school bus, ask whoever does bus acquisition.

I did but he didn’t know so he came here for help

Trevtaowillgetyounowhere said:

buffy said:

furious said:

Do you think that maybe it acts as a guard but isn’t a guard? Looks like it is a hand rail for getting on/off?

This seems likely. Anyway, if it’s on the school bus, ask whoever does bus acquisition.

I did but he didn’t know so he came here for help

So he does know where the vehicle came from and can check with the supplier then…Perhaps by looking at another vehicle of the same type?

:)

buffy said:

Trevtaowillgetyounowhere said:

buffy said:

This seems likely. Anyway, if it’s on the school bus, ask whoever does bus acquisition.

I did but he didn’t know so he came here for help

So he does know where the vehicle came from and can check with the supplier then…Perhaps by looking at another vehicle of the same type?

:)

could be after market fitment.

buffy said:

Trevtaowillgetyounowhere said:

buffy said:

This seems likely. Anyway, if it’s on the school bus, ask whoever does bus acquisition.

I did but he didn’t know so he came here for help

So he does know where the vehicle came from and can check with the supplier then…Perhaps by looking at another vehicle of the same type?

:)

Yup he has 4 busses all kitted out slightly differently.

They were all modified at different times well before I got here. The school has since moved location and I’m dreading having to try and find the details in the archives.

Shudder

Trevtaowillgetyounowhere said:

buffy said:

Trevtaowillgetyounowhere said:

I did but he didn’t know so he came here for help

So he does know where the vehicle came from and can check with the supplier then…Perhaps by looking at another vehicle of the same type?

:)

Yup he has 4 busses all kitted out slightly differently.

They were all modified at different times well before I got here. The school has since moved location and I’m dreading having to try and find the details in the archives.

Shudder

My own fire extinguisher has looked like this for the last 20 years.

I made a metal bracket for my pre-amp yesterday. You could make a bracket.

Trevtaowillgetyounowhere said:

Hi all. Trying to find this fire extinguisher bracket/guard for a Toyota HiAce.

Can’t seem to find it via Google search but that’s prolly me being shit a computers.

The Chubb guy either didn’t know or couldn’t be arsed thinking about it yesterday as they only supply the bottle and mounting plate that attaches to the grey mount/guard.

Any help appreciated

That looks like it was made to suit a small number of vehicles, so not a production line item. We have several like it in our fire trucks. Your best bet would be to go see a local metal working shop and ask them to quote on making it.

Asking them to quote instead of just asking them to make it, means that that they (hopefully) won’t rip you off.

It looks pretty easy to make. One of my previous jobs was steel fabrication. That’s just a bent tube with brackets welded on the ends, and a can of spray paint. I’d quote you less than $200 for it as a one-off job.